4K UHD Video Over IP Transmitter

4K UHD Video Over IP Transmitter

Xantech XT-4K-VIP-TX

4K Video Over IP Transmitter with Audio Breakout and Independent Signal Routing over 1Gb Network

The Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution
is ideal for both commercial and residential installations.

Xantech XT-4K-VIP-TX Features at a Glance
  • Advanced UHD video over 1Gb Network 
  • Virtually unlimited system size 
  • Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
  • Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0) 

NOTE: HDR support is dependant on video signal bandwidth. Please see table in product manual for reference. 

  • Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission 
  • Video up-scaling and down-scaling 
  • Features 4 operational modes: 
    • Matrix distribution (Requires 1Gb network switch) 
    • Video wall (Requires 1Gb network switch) 
    • One-to-one HDMI extender (No network switch required) 
    • One-to-many HDMI splitter (No network switch required) 
  • HDCP 2.2 Compliant 
  • Advanced EDID management 
  • Analog L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter 
  • Analog L/R audio breakout on XT-4K-VIP-RX Receiver 
  • Bi-directional RS-232 and IR pass through 
  • USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
  • PoE (Power over Ethernet) to power Xantech products from PoE switch 
  • Local 24V 1A power input should network switch not support PoE, sold separately 
  • Simple configuration via web-GUI through the XT-4K-VIP-ACM 
  • HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz only 
  • RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM
Xantech XT-4K-VIP-TX Specifications
Shipping Info
  • Length10 (Inches)
  • Width6.4 (Inches)
  • Height2.1 (Inches)
  • Weight1.75 (Lbs)
  • Unit of MeasureEach
  • UPC042777797219
Other Specifications
  • Video input 1 x HDMI Type A, female
  • Audio input 1 x 3.5mm L/R analog audio
  • Audio output 2 x RCA L/R analog audio
  • Video output/Ethernet port 1 x LAN RJ45 connector (PoE 9W)
  • USB / KVM 1 x USB, Type B
  • RS-232 serial port 1 x 3-pin Phoenix connector
  • IR input 1 x 3.5mm stereo jack
  • IR flasher 1 x 3.5mm mono jack
  • Firmware update 1 x USB Micro B
  • Accessories Mounting kit included
  • Dimensions (W x D x H ) 190mm x 114mm x 25mm
  • Shipping weight (Kit) 0.8kg
  • Operating temperature 32°F to 104°F (0°C to 40°C)
  • Storage temperature -4°F to 140°F (-20°C to 60°C)
Xantech XT-4K-VIP-TX Warranty